PLEASE READ BEFORE PURCHASING: When printing the actual microphone part (the piece you speak into), please adjust your support settings before slicing. Make sure you:
Check the box that says “Support Critical Regions”
Uncheck the box that says “On Build Plate Only”
Set your Support Threshold Angle to 35°
These settings will help make it easier to remove the supports from inside the microphone opening and help ensure a cleaner print.
Pencil Microphone Holder Digital File (STL) ✏️🎤
This listing is for a digital STL file only. No physical item will be shipped.
Create your own pencil-inspired microphone design with this 3D-printable file. The microphone holder is designed so that the microphone can be screwed on and removed — nothing is glued together.
Please Note:
This is a digital download for 3D printing.
You will need a 3D printer and basic knowledge of 3D printing to use this file.
A DJI microphone kit/receiver is required to use the microphone with different devices.
I am not responsible for purchasing the DJI kit or ensuring compatibility with your specific device.
I am not responsible for printer settings, slicing settings, computer settings, or print failures due to user settings.
File is designed to print using PLA filament.
When printing the actual microphone part that you speak inside of, go to support, check the box that says support critical regions and uncheck the one that says on build plate so it will be easier to remove the support from inside.
Digital File Terms:
Due to the nature of digital products, all sales are final.
No refunds, exchanges, or cancellations will be accepted after purchase.
You are purchasing a digital file, not a physical product.
By purchasing this file, you agree to these terms.
PLEASE READ BEFORE PURCHASING: When printing the actual microphone part (the piece you speak into), please adjust your support settings before slicing. Make sure you:
Check the box that says “Support Critical Regions”
Uncheck the box that says “On Build Plate Only”
Set your Support Threshold Angle to 35°
These settings will help make it easier to remove the supports from inside the microphone opening and help ensure a cleaner print.
Pencil Microphone Holder Digital File (STL) ✏️🎤
This listing is for a digital STL file only. No physical item will be shipped.
Create your own pencil-inspired microphone design with this 3D-printable file. The microphone holder is designed so that the microphone can be screwed on and removed — nothing is glued together.
Please Note:
This is a digital download for 3D printing.
You will need a 3D printer and basic knowledge of 3D printing to use this file.
A DJI microphone kit/receiver is required to use the microphone with different devices.
I am not responsible for purchasing the DJI kit or ensuring compatibility with your specific device.
I am not responsible for printer settings, slicing settings, computer settings, or print failures due to user settings.
File is designed to print using PLA filament.
When printing the actual microphone part that you speak inside of, go to support, check the box that says support critical regions and uncheck the one that says on build plate so it will be easier to remove the support from inside.
Digital File Terms:
Due to the nature of digital products, all sales are final.
No refunds, exchanges, or cancellations will be accepted after purchase.
You are purchasing a digital file, not a physical product.
By purchasing this file, you agree to these terms.
